FOR ALL ORDERS PLEASE CALL 404-519-9236
ACCORDO
Product Description
Medium Construction 45
Sizes: 225 through310 in 5mm increments. Full and Half Sizes Colors: Ivory and Matt Gungray Type of Skating: Roller Large Figures and Loops and FreeStyle (just under the FLY) Training Level: High Level Figures and Loops or Double, Triple, and Quad Jumps Training Hours: 20 to 25 Hours per week
The EDEA Accordo is the Ultimate Skating Boot for Roller Large Figures and Loops (if used as only Skates for Figures, or for Loops especially if two (2) pairs are used for Figures, then Concerto for the Large Figures) , and High Level FreeStyle Roller Skating. Ultra Light Medium Construction with Beautiful Leather finish outside and perforated MicroFibre Lining. The Accordo is made with Revolutionary NEW Ultra Lightweight Materials which means that the Accordo is 25% to 45% lighter than comparable Skating Boots. Available from Theperfectsk8s.com, the Accordo is designed for High Performance Roller Large Figures and Loops and High Level FreeStyle Roller Skating and is incredibly comfortable.
The MicroPerforated MicroFibre Lining is long lasting and ventilates the perspiration quickly. The Anatomically Shaped Padding and Formed fit of the boot is shaped by the Thermoformable Structure and provides the best in foot contact and control while giving the movement range to allow Great Performances. Other features are the comfortable Back Cuff Padding, the Rounded Heel Shape which more evenly distributes the weight and adds torsional stability, the Full Wrapped Padding, the Shaped Extra Padded Tongue, the Tongue Tab which controls the position of the tongue, and the Sewn in strong forged long Hooks. The Footbed has direct Ventilation and is torsionally rigid but with just a bit of vertical compression, that creates a lower center of gravity in the Skate, that creates a lower displacement which greatly increasing stability and control.
In most cases the Break-In period is just a few hours, not days, weeks, or Months, but the most important Features are how LIGHT and COMFORTABLE the EDEA Accordo is.
EDEA and Theperfectsk8s.com strongly recommend the use of Power Wedges to be installed between the curved Skating Boot and the flat Roller Frame to keep the foot in it’s natural and to NOT Deform the Boot. A major advantage of the Power Wedge is that it provides VERY Secure CONTACT between the Boot and Skate Frame. This gives more power to each push and stroke, thus the name POWER WEDGE. It is not necessary to use the power wedges on a Roller Frame with a sloped front,
The Sizing of EDEA Skates is very consistent for each size and between models. Frame sizing for Roller Skates to EDEA Skates should be completed with much care. In Roller Skating different types of Skating require very different positions of the front axle in relation to the ball of the foot. When Mounting EDEA Skates, please follow the correct Roller Frame Mounting procedures for all EDEA Skate. Theperfectsk8s .com is the number one expert at mounting the High performance ATLAS or Roll-Line Roller Frame of your choice. The Sizing and Mounting information is in the NEED TO KNOW page comming soon.
EDEA Skates fit a great majority of Skaters (because of the newly designed shoe lasts), right out of the box, but some have need of special accommodations to give that perfect fit. EDEA Skates ALL have a Thermoformable Structure which allows manipulation of the boot to give the perfect Custom fit without the Custom price . EDEA Skates DO NOT use gel packs (the reverse of a freezer ice bag) that are heated in an oven, then the foot inserted to shape the inside padding of the boot only, this method allows change and movement of the gel in the pack over time, which is not a good thing. EDEA Skates DO use very high tech materials (similar to a carbon fiber or Kevlar material) which can be shaped using Heat Guns and Special Shoe Lasts, in very specific locations or general widening or narrowing of the Skating Boot. Once the boot is re-shaped, it will stay in that shape, until the shaping process is changed again.
Sizes: 225 through310 in 5mm increments. Full and Half Sizes Colors: Ivory and Matt Gungray Type of Skating: Roller Large Figures and Loops and FreeStyle (just under the FLY) Training Level: High Level Figures and Loops or Double, Triple, and Quad Jumps Training Hours: 20 to 25 Hours per week
The EDEA Accordo is the Ultimate Skating Boot for Roller Large Figures and Loops (if used as only Skates for Figures, or for Loops especially if two (2) pairs are used for Figures, then Concerto for the Large Figures) , and High Level FreeStyle Roller Skating. Ultra Light Medium Construction with Beautiful Leather finish outside and perforated MicroFibre Lining. The Accordo is made with Revolutionary NEW Ultra Lightweight Materials which means that the Accordo is 25% to 45% lighter than comparable Skating Boots. Available from Theperfectsk8s.com, the Accordo is designed for High Performance Roller Large Figures and Loops and High Level FreeStyle Roller Skating and is incredibly comfortable.
The MicroPerforated MicroFibre Lining is long lasting and ventilates the perspiration quickly. The Anatomically Shaped Padding and Formed fit of the boot is shaped by the Thermoformable Structure and provides the best in foot contact and control while giving the movement range to allow Great Performances. Other features are the comfortable Back Cuff Padding, the Rounded Heel Shape which more evenly distributes the weight and adds torsional stability, the Full Wrapped Padding, the Shaped Extra Padded Tongue, the Tongue Tab which controls the position of the tongue, and the Sewn in strong forged long Hooks. The Footbed has direct Ventilation and is torsionally rigid but with just a bit of vertical compression, that creates a lower center of gravity in the Skate, that creates a lower displacement which greatly increasing stability and control.
In most cases the Break-In period is just a few hours, not days, weeks, or Months, but the most important Features are how LIGHT and COMFORTABLE the EDEA Accordo is.
EDEA and Theperfectsk8s.com strongly recommend the use of Power Wedges to be installed between the curved Skating Boot and the flat Roller Frame to keep the foot in it’s natural and to NOT Deform the Boot. A major advantage of the Power Wedge is that it provides VERY Secure CONTACT between the Boot and Skate Frame. This gives more power to each push and stroke, thus the name POWER WEDGE. It is not necessary to use the power wedges on a Roller Frame with a sloped front,
The Sizing of EDEA Skates is very consistent for each size and between models. Frame sizing for Roller Skates to EDEA Skates should be completed with much care. In Roller Skating different types of Skating require very different positions of the front axle in relation to the ball of the foot. When Mounting EDEA Skates, please follow the correct Roller Frame Mounting procedures for all EDEA Skate. Theperfectsk8s .com is the number one expert at mounting the High performance ATLAS or Roll-Line Roller Frame of your choice. The Sizing and Mounting information is in the NEED TO KNOW page comming soon.
EDEA Skates fit a great majority of Skaters (because of the newly designed shoe lasts), right out of the box, but some have need of special accommodations to give that perfect fit. EDEA Skates ALL have a Thermoformable Structure which allows manipulation of the boot to give the perfect Custom fit without the Custom price . EDEA Skates DO NOT use gel packs (the reverse of a freezer ice bag) that are heated in an oven, then the foot inserted to shape the inside padding of the boot only, this method allows change and movement of the gel in the pack over time, which is not a good thing. EDEA Skates DO use very high tech materials (similar to a carbon fiber or Kevlar material) which can be shaped using Heat Guns and Special Shoe Lasts, in very specific locations or general widening or narrowing of the Skating Boot. Once the boot is re-shaped, it will stay in that shape, until the shaping process is changed again.
 |
